Heat Pump Panel Check — Idaho

In Idaho, a whole-home air-source heat pump typically costs $5,000–$14,000 installed, depending on home size, system type, and contractor. Cold-climate models for zones like Zone 5B cost more but deliver lower operating costs. Combined rebates of up to $500 (state programs) can offset a significant portion of installed cost.

Idaho's HEEHRA program has not yet launched but is expected to open. Idaho has not yet launched its HEEHRA program as of March 2026. Contact the Idaho Office of Energy and Mineral Resources for updates. IRA 25C tax credit expired Dec 31, 2025. Check your state energy office for updates. Note: the federal IRA 25C tax credit expired December 31, 2025 and is not available for new 2026 installations.

Idaho falls in IECC 2021 Zone 5B — Cool-Dry. Typical winter design temperatures are 5°F to 15°F. Cold-climate ASHP required. High-altitude locations add an elevation derate on heating output — size with margin. Sizing requires a Manual J load calculation — but as a rough rule, allow 20–30 BTU/h per square foot for older homes in Idaho.

Not necessarily. Most 200A panels in Idaho have headroom for a heat pump under the NEC 220.82 Optional Method — which accounts for diversity of loads rather than peak simultaneous demand. A 100A panel is more likely to require an upgrade, especially if you also have an EV charger or electric range. Our free audit calculates your exact available capacity in 3 minutes using the same method your electrician would use.