NEC 220.82 · Zone 4C

Heat Pump Panel Check — Oregon

Is your Oregon home ready for a heat pump? Check your electrical panel capacity in 3 minutes — free. Same NEC 220.82 Optional Method your electrician uses.

Up to $9,500 in rebates available in Oregon

Serving Portland, Eugene, Salem, Gresham and all of Oregon

Available rebates in Oregon

ESTIMATE ONLY — amounts and eligibility change. Verify with program administrators before purchasing.

Federal — Expired

IRA 25C Tax Credit

$0

IRA Section 25C expired December 31, 2025. Not available for heat pump systems installed in 2026.

Installed before Dec 31, 2025? Claim on your 2025 tax return (IRS Form 5695).

HEEHRA

Open

Oregon Program

$8,000
Low income (<80% AMI)$8,000
Moderate (80–150% AMI)$4,000

HEEHRA program launched in late 2025/early 2026 and is active as of March 2026. Oregon homeowners with income ≤ 150% AMI are eligible for rebates up to $8,000 for heat pumps. Administered through the Oregon Department of Energy. Contact them directly for current availability.

State / Utility

Oregon Programs

Energy Trust of Oregon Heat Pump Rebates

$1,500
Details →

Portland General Electric Heat Pump Rebates

$700
Details →

Estimated maximum combined rebates in Oregon

HEEHRA $8,000+ state programs $1,500 (IRA 25C expired Dec 31, 2025)

Low income (<80% AMI)

up to $9,500

Moderate income: up to $5,500

ESTIMATE ONLY. Amounts vary by income, equipment specifications, and program availability. Not all programs are stackable. Verify eligibility before purchasing equipment.

IECC 2021Zone 4C — Mixed-Marine

Oregon climate and heat pump sizing

Oregon is classified as IECC 2021 Zone 4C — Mixed-Marine. Typical winter design temperatures are 28°F to 37°F.

Marine-influenced winters are mild and damp. Standard ASHP is efficient; cold-climate models add buffer for occasional cold snaps.

Pacific Northwest panel capacity checks often flag EV charger + heat pump combinations as the binding constraint.

Oregon at a glance

IECC Zone4C
Design temp range28°F to 37°F
Cold-climate HP neededRecommended
Electrical codeNEC 220.82
Check my Oregon panel →

How the Oregon panel check works

Three inputs, one clear answer. No electrician visit required for a preliminary NEC 220.82 assessment.

01

Enter your ZIP + panel details

Your ZIP code in Oregon pre-loads your IECC zone and available rebates. Add your panel size, square footage, and existing loads.

02

NEC 220.82 calculation runs

The Optional Method — first 10 kVA at 100%, remainder at 40%, plus the largest of AC / heat pump / existing heat. Same standard your electrician uses.

03

PASS, WARN, or FAIL — plus rebates

Get exact amperage figures, upgrade recommendation if needed, and a full breakdown of Oregon rebates you qualify for. Download the PDF to share with your contractor.

Frequently asked questions — Oregon

How much does a heat pump cost in Oregon?

In Oregon, a whole-home air-source heat pump typically costs $5,000–$14,000 installed, depending on home size, system type, and contractor. Cold-climate models for zones like Zone 4C cost more but deliver lower operating costs. Combined rebates of up to $9,500 (HEEHRA + state programs) can offset a significant portion of installed cost.

Is HEEHRA available in Oregon?

Yes — Oregon has launched its HEEHRA program. Income-qualified households (under 80% AMI) can receive up to $8,000 for a qualifying heat pump. Moderate-income households (80–150% AMI) may receive up to $4,000. HEEHRA program launched in late 2025/early 2026 and is active as of March 2026. Oregon homeowners with income ≤ 150% AMI are eligible for rebates up to $8,000 for heat pumps. Administered through the Oregon Department of Energy. Contact them directly for current availability.

What size heat pump do I need in Oregon?

Oregon falls in IECC 2021 Zone 4C — Mixed-Marine. Typical winter design temperatures are 28°F to 37°F. Marine-influenced winters are mild and damp. Standard ASHP is efficient; cold-climate models add buffer for occasional cold snaps. Sizing requires a Manual J load calculation — but as a rough rule, allow 20–30 BTU/h per square foot for older homes in Oregon.

Do I need a panel upgrade for a heat pump in Oregon?

Not necessarily. Most 200A panels in Oregon have headroom for a heat pump under the NEC 220.82 Optional Method — which accounts for diversity of loads rather than peak simultaneous demand. A 100A panel is more likely to require an upgrade, especially if you also have an EV charger or electric range. Our free audit calculates your exact available capacity in 3 minutes using the same method your electrician would use.

Check your Oregon panel capacity now

Free NEC 220.82 load calculation. Takes 3 minutes. Find out if your Oregon home is ready for a heat pump — before you spend $5,000 on an unnecessary panel upgrade.

Up to $9,500 in rebates available to qualifying Oregon homeowners.

ESTIMATE ONLY — NEC 220.82 Optional Method. Verify all results with a licensed electrician before any panel modifications.